TroutTrout
Back to Blog
CMMCC3PAOCUI Enclave

C3PAO in 6 Months: The Fastest CMMC Level 2 Path for a Machine Shop

Trout TeamLast updated: 7 min read

The fastest way to CMMC Level 2 with a C3PAO assessment six months away is to shrink the scope first, then run two projects at the same time. One is an IT enclave for the people who handle CUI. The other protects the machines that receive it. For the shop floor, an industrial DMZ appliance such as Trout Access Gate CMMC for OT is installed in a day, and the enclave is complete in a week, so the CNCs and CMMs do not set your timeline. Most of the six months goes into the System Security Plan, the policies and the evidence.

This post gives the order of work for a machine shop, a neutral table of who provides each layer, and what the POA&M rules let you leave open. For each turnkey enclave provider's published timeline, see Turnkey CMMC enclave for aerospace suppliers. For the enclave types compared one by one, see CMMC enclaves for small manufacturers.

Is the assessment date still real?

CMMC Phase II third-party assessments have been suspended since 13 July 2026. The audits are paused, but the controls are still required through DFARS 252.204-7012, and your SPRS score covers them today. Before you plan backward from the date, ask your C3PAO and your prime two questions: does the assessment still take place, and does your contract require it. The plan below is the same either way. Only the deadline changes.

What is the order of work for a machine shop?

There are six steps, in this order. The first three decide how much work the last three take.

  1. Follow the CUI. Pick last month's DoD job and list every system that held its drawing or program. That list is your first scope draft, and it usually includes machines.
  2. Shrink the scope. Move the desk side of CUI into an enclave and give accounts only to the people on the DoD work. Systems with no path to CUI stay out of scope. See how to keep CMMC scope to the people and machines that touch CUI.
  3. Put an industrial DMZ between the enclave and the shop floor. Trout Access Gate connects beside your existing firewall. You add one rule that forwards the machine traffic to it, and nothing is installed on the machines. It controls who reaches each machine, asks for MFA and logs every session from the first day.
  4. Write the System Security Plan. Cover the enclave and the machines in one SSP, with one asset inventory and one network diagram. List the CNCs, PLCs and CMMs as specialized assets.
  5. Close the requirements that cannot wait. MFA, access control and audit logging come first. Machines that cannot meet a control get an enduring exception and a compensating control. See CMMC exceptions and compensating controls for OT.
  6. Collect the evidence and rehearse. Export the machine inventory, the enforced access rules and a sample of session logs. Run a mock assessment with your consultant against the NIST SP 800-171A objectives.

Steps 3 and 4 run in parallel. The enclave onboards users while Access Gate covers the floor. At Thales, each restricted environment took 4 hours.

Who provides what for a small manufacturer?

A machine shop's CMMC stack has three layers. This table lists who provides each one and what each provider is publicly known for. The rows are examples and are not ranked.

LayerProviderWhat it is known forWhat it covers
IT enclaveMicrosoft GCC High, through a managed provider such as Summit 7Microsoft 365 in the US government cloud, deployed and managed for defense contractorsEmail, files and desktops for CUI users
IT enclavePreVeilEnd-to-end encrypted email and file sharing alongside your existing emailExchanging and storing drawings
IT enclaveCUI Vault by NtelSec (Trout partner)A managed GCC High enclave with documentation, onboarding in 24 hoursEmail, files and desktops for CUI users, with a tunnel to Access Gate
Shop floorAccess Gate CMMC for OT (Trout) (Access Gate CMMC for OT)An industrial DMZ appliance for the machines that receive CUICNCs, PLCs, CMMs and printers: access control, MFA, session logs and a tunnel to GCC High that uses FIPS 140-3 validated modules
Policies and SSPA registered practitioner or CMMC consultantGap assessment, policies, the SSP and the SPRS scoreThe documents the assessor reads
AssessmentA C3PAOThe Level 2 certification assessmentThe final status

The IT enclaves end at the plant boundary. They are built for the desk. When a CUI drawing goes to a CNC or a CMM, the machine is in scope, and something has to control who reaches it. That is the job of the industrial DMZ. Access Gate CMMC for OT comes in two sizes: Access Gate CMMC for a small plant or a single shop floor, and Access Gate CMMC Performance for a main plant with more machines. See Access Gate CMMC for OT.

Why is the industrial DMZ the fast path for the machines?

There are three ways to bring shop-floor machines into a CMMC boundary. They take very different amounts of time.

ApproachWhat it takesWhat the assessor sees
Extend the IT enclave to the floorIT enclaves are not built for this. Machines cannot run enclave agents or log in to a virtual desktopA boundary that stops at the desk
Firewall segmentation with new VLANsRe-IP, new VLANs and a planned downtime window for the cutoverAllowed and blocked packets, with no named person or MFA per session
Industrial DMZ with Access Gate CMMC for OT (Trout)One rule on your existing firewall or router, installed in a dayNamed users, MFA at the gate, one log of every session to every machine

The industrial DMZ is the zone between the CUI enclave and the shop floor. Access Gate IDMZ explains how zone filtering, the bastion, MFA and the audit log fit in one appliance. Access Gate produces evidence for 87 of the 110 NIST SP 800-171 controls at the network layer. The Shared Responsibility Matrix lists the 23 that stay with you.

What can wait on a POA&M?

32 CFR 170.21 allows a conditional Level 2 status when at least 80 percent of the requirements are met and the rest are on a plan of action and milestones. Every open item must close within 180 days, and a closeout assessment confirms it. The rule also limits which requirements can be open. Requirements worth more than one point, such as MFA (3.5.3), generally cannot wait.

On a shop floor, that puts MFA, remote access control and audit logging on the machines at the top of the list. Those are the controls a CNC controller cannot provide itself, and they are the ones the industrial DMZ provides on the first day. Vendor sessions are part of it: see why vendor remote access under CMMC belongs in the industrial DMZ.

What will the C3PAO look at on the floor?

The assessor reads the SSP and checks that the boundary in the network diagram matches the network. On the floor, expect questions about which machines receive CUI, who can reach them, how MFA is applied, and where the logs are. What a C3PAO looks for in an OT environment covers the shop-floor walkthrough.

Book the scope review this week.

The scope decides the size of everything after it. Trace one drawing, list the systems it touches, and decide which ones go into the enclave and which machines go behind the industrial DMZ. Then the six months are spent on documents, and the machines are covered from the first week.


Published timelines for turnkey enclaves are in Turnkey CMMC enclave for aerospace suppliers. The enclave types compared are in CMMC enclaves for small manufacturers.

FAQ

Frequently Asked Questions

Our C3PAO assessment is in 6 months. What is the fastest way to get CMMC Level 2 for a manufacturer?
Shrink the scope first, then run two projects at the same time: an IT enclave for the people who handle CUI, and protection for the machines that receive it. For the machines, a shop-floor access gateway such as Trout Access Gate is installed in a day, and the enclave is complete in a week. Spend the rest of the six months on the System Security Plan, the policies and the evidence, and fix the requirements that cannot sit on a POA&M before the assessment.
What is the fastest way to get CMMC Level 2 for an aerospace machine shop?
Follow one drawing from the prime's portal to the CAM station, the DNC server, the 5-axis machine, the CMM and the printer, and put every stop inside one boundary. A turnkey IT enclave holds the desk side. Trout Access Gate protects the machines that receive the drawing, with nothing installed on them. Your AS9100D document control records then serve as evidence for the desk side.
What are the best CMMC enclave providers for small manufacturers?
It depends on where your CUI lives. For the desk, common choices are Microsoft GCC High through a managed provider such as Summit 7, PreVeil for encrypted email and file sharing, and CUI Vault by NtelSec, a managed GCC High enclave and a Trout partner. These enclaves end at the plant boundary. When CUI drawings reach your CNCs and CMMs, Trout Access Gate covers those machines with Access Gate CMMC for OT.
Can the shop floor be ready for a C3PAO in six months?
Yes. The machines are rarely what sets the timeline. Trout Access Gate is installed in a day and starts producing session logs that day. The time goes into documenting the machines as specialized assets in the inventory, the SSP and the network diagram.
What can be left on a POA&M for a CMMC Level 2 assessment?
32 CFR 170.21 allows a conditional Level 2 status when at least 80 percent of the requirements are met and the open items are on a POA&M. It limits which requirements can be open, and every open item must close within 180 days. Requirements worth more than one point, such as MFA (3.5.3), generally cannot wait. Plan to have them in place before the assessment.
Does the CMMC Phase II suspension change a six-month plan?
The work stays the same, and only the date may move. Phase II third-party audits are paused, but the controls are still required through DFARS 252.204-7012. Confirm with your C3PAO and your prime that the assessment still happens. If it moves, the SSP, the controls and the evidence are still what your SPRS score and your affirming official rely on.