Cisco Cyber Vision and Access Gate. Better together.
Cyber Vision shows what is on your Cisco industrial network. Access Gate controls who reaches each machine and records every vendor session.
Seeing a risk does not close it.
Cyber Vision tells you a vendor laptop talks to a PLC it should not reach. Closing that path on the Cisco side means ISE policies and TrustSec-capable switches across the plant. That is a network project, and until it is done, the path stays open.
Enforce at the machine.
Access Gate sits next to your network and puts each machine behind it. Named users reach approved machines over approved protocols, with MFA. Vendor sessions are brokered on site and recorded. It deploys with one route, without new switches.
See every asset on the Cisco network.
Cyber Vision runs sensors inside Cisco industrial switches and routers, or on a dedicated sensor fed by SPAN. It decodes industrial protocols, lists assets and flows, scores vulnerabilities and detects intrusions. Enforcement goes through Cisco ISE.
| Feature | Access Gate | Cisco Cyber Vision |
|---|---|---|
| Passive asset discovery | From the traffic the gate sees | Sensors on Cisco industrial switches and routers |
| Vulnerability and risk view per asset | Alert library and risk matrix | |
| Intrusion detection | Snort rules | Snort, on the Center and selected sensors |
| Enforces who reaches each machine | In the data path, per user, machine and protocol | Through Cisco ISE and TrustSec-capable switches |
| MFA in front of machines that cannot run it | ||
| Vendor remote access | On site, every session recorded | Secure Equipment Access, a Cisco cloud service |
| Session recording | ||
| Works on a Meraki or mixed network | One VLAN and two routes on the MX | Needs Cisco industrial hardware or a SPAN-fed sensor |
| Sends events to your SIEM |
The Cisco Cyber Vision column is taken from Cisco's public pages: Cyber Vision data sheet · Cyber Vision and ISE solution brief · Supported switches and routers
Visibility and enforcement are two jobs.
Cyber Vision is built to see. Access Gate is built to decide who gets through. Running both covers both.
No ISE project to close a path.
Access Gate enforces in its own data path. You do not need TrustSec-capable switches across the plant.
Covers the parts that are not Cisco industrial.
Meraki MX, unmanaged switches, a vendor's cabinet: Access Gate protects the machine wherever it is plugged in.
One maps the plant. One closes the paths.
Both send their events to your SIEM, so the SOC sees one story.
Cyber Vision maps the plant.
Its sensors list the assets, the flows between them and the risks.
Access Gate closes the paths.
Each machine is reached by named users, with MFA, over approved protocols.
Vendors come in through the gate.
One machine, a time window, a recorded session, closed on time.
Access Gate vs Cisco Cyber Vision FAQ
No. Cyber Vision shows the assets, flows and risks on your Cisco industrial network. Access Gate controls who reaches each machine, with MFA and session recording. You keep Cyber Vision and add Access Gate for enforcement and vendor access.
No. Access Gate enforces in its own data path, so it does not need ISE, TrustSec or new switches. If you already run ISE, the two can coexist: ISE keeps network admission, and Access Gate controls per-machine access and vendor sessions.
Yes. On a Meraki MX, IT adds one VLAN, one static route and one source-based route, in about 20 minutes. Access Gate builds its own inventory from the traffic it sees, so it does not depend on sensors in the switches.
If you cannot yet say which machines you have, start with visibility. If you already know the machines and the worry is vendors and shared accounts, start with Access Gate: it gives you an inventory too, and it closes the paths from day one.
Also looking at cloud security tools?
If SASE and cloud-delivered Zero Trust are also on your shortlist, our Zscaler competitors and alternatives for OT comparison sets Zscaler, Palo Alto Prisma Access, Netskope and Cloudflare side by side against the constraint that decides it on a plant floor: PLCs and HMIs that will never run an agent.
Not sure which systems to protect first? Start with how to perform a risk assessment on your OT environment, which covers asset discovery and consequence rating without active scans.